|
|
I2C Bus to RS232 Bus Convertor
Votava, Martin ; Marvan, Aleš (referee) ; Orság, Filip (advisor)
The main goal of this Bachelor's thesis is to create I2C bus to RS232 bus convertor. Using I2C bus the convertor drives 8bit I/O expander. In theoretical part buses I2C and RS232 are described along with PCF8574. There is also mentioned selection appropriate microcontroler and design of comunication protocol. Practical part is dedicated to creating control program for microcontroler, appropriate comunication protocol processing and convertor testing. There are also described some auxiliary products and program testing.
|
|
| |
|
|
Home Security and Monitoring System
Valach, Lukáš ; Crha, Adam (referee) ; Šimek, Václav (advisor)
The thesis elaborates on an implementation of wireless home security system. The wireless communication utilizes IEEE 802.15.4 radios and ZigBee communication protocol. The beginning of the thesis provides specification of the intended system followed by an evaluation of usable energy harvesting solutions and later by consideration of single board computer systems suitable for implementation of the control node of the sensor network. The rest of the thesis describes design, implementation and testing of particular components of the security system. Conclusion evaluates the achieved goals and offers suggestions for future work. The end products of the thesis are physical devices implementing wireless sensor nodes, control unit of the security system as well as a graphical user interface for the system management.
|
|
|
Infant Movement Monitor
Zahradníčková, Ludmila ; Chmelař, Milan (referee) ; Sekora, Jiří (advisor)
Movement monitor is a detection device for monitoring the frequency of breathing of newborns and infants. It is usually indicated to children under the one year as a support to reduce the risk associated with sleep apnoea and Sudden Death Syndrome. The theoretical part of this bachelor thesis discusses the physiology of respiration, respiratory disorders, methods of monitoring and treatment. The aim of the technical part is to design own monitoring device for detecting and evaluating the frequency of breathing. It includes a block diagram and a wiring scheme of device and a flow chart of program, which is implemented by a microcontroller.
|
|
|
AVR32 Model Coreation
Sarčák, Rostislav ; Kajan, Michal (referee) ; Masařík, Karel (advisor)
This barchelor's thesis describe creation of AVR32 processor instruction-accurate model using CodAL language. In this thesis RISC AVR32 architecture, approach to implementation of the model, testing and generating of software toolchain is described. Model development is realized in Codasip framework. Model contains implementation of AVR32 instruction set. The result of this work is AVR32 processor instruction-accurate model.
|
|
|
Biometrical security system
Tříska, Martin ; Kučera, Pavel (referee) ; Macho, Tomáš (advisor)
This bachelor’s thesis deals with coplete design and implementation of access control system.using biometrical data. System is applicable in smaller applications. The first part contains an small introduction to fingerprint acquiring/processing and also describe selection of a communication interface between terminals and host system including possible ways of embedding into devices. The next part is covered in the practical implementation in terms of both hardware and software.
|
|
|
Altitmeter for RC aircraft models
Švec, Jan ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
The aim of my bachelor thesis is to design a altimeter, who uses to record the attitude of the model "RC plane" evaluation of the current atmospheric pressure. The data are storaged during the flight into memory. Data can be after the recording through the USB transferred to the PC store. The software on the PC communicates with the device and ensuring the conversion of recorded pressure to altitude RC model.
|
|
|
USB cable tester
Fašanga, Jozef ; Hanák, Pavel (referee) ; Lattenberg, Ivo (advisor)
Measuring low resistances is a problem that also occurs with USB cables. The basic feature influencing the functionality is the voltage drop. The work deals with the theoretical possibilities of measuring low resistances and subsequent realization of connections. The ATmega32U4 microcontroller is used to control the device, which provides a USB interface for programming. Work theoretically discusses individual communications used for OLED display and ADC. Subsequently, the work discusses the design of the box for the device and the basics of the program, which is uploaded to the microcontroller.
|
|
|
Wireless temperature sensor with high temperature warning indicator
Dvořák, Petr ; Petržela, Jiří (referee) ; Hruboš, Zdeněk (advisor)
This thesis deals with a proposal of a wireless temperature-sensitive element at high temperature. It analyses some different variants of the temperature sensors. Furthermore, the thesis describes the Industry Science Medical (ISM) bands, in which it will be possible to communicate with the wireless communication modules. These wireless modules are discussed and described. By the devices „the transmitter and the receiver" it is focused on the communication of the microcontroller Atmel with the wireless modules, with the temperature sensors, microswitches on the control and display unit (LCD).
|
|
|
Temperature and humidity measuring station
Vilímek, Tomáš ; Marcoň, Petr (referee) ; Szabó, Zoltán (advisor)
Bachelor thesis entitled „Temperature and humidity measuring station“ is focused on design of a device, that will be able to measure, save and display information about temperature and humidity from connected sensors. There is described used components such as LCD display, sensors, RTC, data saving, communication with personal computer and description of alternative sensors. Practical part contains implementation of components, scheme, manual for the device and decription of device firmware.
|
guest ::
